You finally decided to buy a plasma tube cutter. That’s a really good choice if you want to cut down a large number of metals. However, there are other things you also have to consider before buying one of these powerful machines. That is what this article is going to talk about.
It is also going to decide where you can get some of the best plasma tube cutters around. If you are ready, let’s begin!
Buying a plasma tube cutter
So here are some of the things you should consider when buying a plasma tube cutter
Its output
Here’s a general principle you should know about. The output of any plasma tube cutter will determine the exact metal it can cut through.
You must consider the output closely. Of course, it’s not always a good idea to just buy the largest machine with the biggest output. Make sure you consider its machine with your targets. Buying a big plasma tube cutter will be useless if you don’t really have thick metals.
Another idea will be to go for plasma cutters that use inverters. They are much lighter and provide you with more output power. It’s something you can always consider.
How long can it last?
This is often referred to as the duty cycle of a plasma tube cutter. It refers to the duration it can last working repeatedly without having to cool off.
The duty cycle of a plasma tube cutter will often depend on the amount of power being used. If the power is less, then you will be able to have a longer duty cycle and vice versa.
If you are aiming for deep cuts into your metal, then opting for a plasma cutter with a longer duty cycle will be the best decision.
Your consumables
Next, you have to consider the consumables you will have to get. One of the most likely ones will be electrodes. You might also have to get some cutting tips.
To understand how each consumable works and if your machine is really going to need it, it might be worth doing a bit of research. Also, remember that your consumables are directly responsible for the quality of your tubes. Get it all wrong and you might just be heading for disaster.
Getting the best plasma tube cutter
So, if you have decided to get a plasma tube cutter, you will definitely be looking out for the best. Most companies that sell these machines will be happy to give you a quote. All you have to do is to contact them.
That shouldn’t be too hard.
Final Thoughts
So there you have it! Making the decision to buy any machine is a big one. It’s also a big investment. This means that any blunder can set you back by a mile.
Considering the factors above will help you to avoid making such blunders. It will also help you get the best value for your money. That is something no one should miss out on.
